Skip to content

CDL Combination Vehicles

Past exam questions and practice questions based on official past exams

Based on 2026 exam standards

Exam info

▼ Show▲ Hide
Type
State license
Field
Driving
Provider
State driver licensing agencies (DMV)
Sections
CDL Combination Vehicles Test (20)
Questions · Time
20 questions · 25 min
Format
Multiple choice questions on the Combination Vehicles section of your state's CDL manual (Section 6 in the common manual layout). You take this test for a Class A license, which covers tractor-trailers and other combinations. Washington, for example, uses 20 questions with 16 needed to pass, and New York's manual says every CDL knowledge question has three answer choices. Time limits are not published in every state, so this practice mock uses 20 questions, 25 minutes, and 3 answer choices.
Passing score
Federal rules require at least 80% correct on every CDL knowledge test. On a 20-question test, that means at least 16 correct answers, so you can miss no more than 4.
Eligibility
You take the Combination Vehicles test when you want a Class A commercial learner's permit (CLP) or CDL, the class for tractor-trailers and other vehicle combinations. You also need to pass the CDL General Knowledge test, and usually the Air Brakes test because most combinations have air brakes. You must hold a valid regular driver license and meet your state's age and medical rules. Check your state's driver licensing agency for documents and fees.

Exam outline

▼ Show▲ Hide

CDL Combination Vehicles study tips

Written by our team
▼ Show▲ Hide
Study order
Start with Combination Vehicle Air Brakes, the largest chapter here (30%). The coupling and inspection chapters use the same parts: the red trailer air supply knob, the service and emergency lines, and the shut-off valves. Then learn Coupling and Uncoupling (25%) step by step, and finish with Driving Combination Vehicles Safely (25%), Inspecting a Combination Vehicle (10%), and Antilock Brakes on Trailers (10%).
Topics people often miss
Combination Vehicle Air Brakes is easy to mix up because the two air lines have two names each: the service line is also the control or signal line, and the emergency line is also the supply line. Coupling and Uncoupling questions often ask what comes first, so learn why each step happens, such as locking the trailer brakes before backing under the trailer.
Test day tips
You need at least 80% to pass, which is 16 correct answers out of 20, so you can miss no more than 4. Each question has three choices, and the wrong ones often swap one word, like service for emergency or shank for head. Read all three before you answer.

More about CDL Combination Vehicles

Trends · overview · FAQ
▼ Show▲ Hide

CDL Combination Vehicles exam trends

Expect questions on the parts that only combinations have: the red trailer air supply knob and when it pops out (20 to 45 psi), the blue service line and red emergency line, glad hands, shut-off valves on doubles, and why the trailer hand valve is not used for driving or parking. Coupling questions ask about the order of the steps, trailer height, the tug test, and checking that the jaws close around the kingpin shank with no gap at the fifth wheel. The chapters on this site follow the manual but are study groupings, not official test sections.

Learn the trailer air system first, because coupling and inspection questions use the same parts. Then walk through the coupling steps in order until you can say them without notes. Finish with the driving topics, where the manual's reasons (why empty rigs skid, why the rear trailer tips) are what the questions test.

CDL Combination Vehicles Sample Questions and Explanations →

About CDL Combination Vehicles

The CDL Combination Vehicles test checks what you know about driving, coupling, and inspecting a truck that pulls a trailer. It covers rollover and trailer skid risks, off-tracking and backing, the trailer's air brake parts such as the tractor protection valve and the two air lines, antilock brakes on trailers, the coupling and uncoupling steps, and the extra inspection checks for a combination. The test is based on the Combination Vehicles section of your state's CDL manual.

FAQ

Q. What score do I need to pass the CDL Combination Vehicles test?
Federal rules require at least 80% correct on every CDL knowledge test. On a 20-question test, that is at least 16 correct answers. Your state may use a different number of questions, but the 80% rule is the same.
Q. Who needs the Combination Vehicles test?
Drivers who want a Class A CLP or CDL need it. Class A covers a combination with a gross combination weight rating over 26,000 pounds when the towed unit is rated over 10,000 pounds, such as a tractor-trailer.
Q. Which part of the CDL manual should I study?
Study the Combination Vehicles section, which is Section 6 in the common CDL manual layout. Section 5 on air brakes helps too, because the trailer brake parts build on it. Check your state's manual for its exact list of sections.
Q. Are these the real CDL test questions?
No. The real question banks are not public. Every question here is an original practice question written from the rules in state CDL manuals. Use this site to practice, and read your state's official CDL manual as well.

CDL Combination Vehicles reviews

Written by users

Loading reviews…