Skip to content

CDL Hazardous Materials (HazMat): Labels, Markings, and Placards Concepts

Importance ★★★★★ · 20% (estimate)

Based on 2026 exam standards

Overview

Labels and placards are the pictures and signs that warn people about hazmat. Labels and markings go on the packages, while placards go on the outside of the vehicle and on bulk packages. This chapter shows where each one goes, how placards must be mounted, and how to pick the right placards for a load.

Shippers put diamond labels on most hazmat packages, and a tag or decal may be used when a label will not fit, as on a gas cylinder. Package markings include the shipping name, which must match the name on the shipping paper, and the ID number. Packages holding liquid containers carry arrows that must point up for the whole trip. It is smart to compare the papers with the labels and markings before you leave.

Placards must be on before you move the truck, and you may only drive without proper placards in an emergency to protect life or property. Each sign must face its direction, read level from left to right, stay clean, sit on a contrasting background, and be kept clear of ladders, doors, and tarps. The front placard can be on the tractor or on the front of the trailer.

To choose placards, you need the hazard class, the amount of each material, and the total weight of all hazmat on board. The most dangerous materials are in Table 1 and need placards in any amount. The rest are in Table 2 and need placards once the total reaches the weight limit. A few special rules let you skip one placard when a stronger one is already showing, and other rules add placards even for small amounts.

Key concepts

  • Placard

    A diamond-shaped warning sign on the outside of a vehicle or bulk package that shows the hazard class. A placarded vehicle needs at least four identical ones, at least 10.8 inches square, readable from all four directions.

    Memory tipFour sides, four signs.

    Source: 49 CFR / NY DMV CDL-10 Section 9 · as of 2026

  • Placard Table 1

    Materials that need placards in any amount: explosives 1.1 to 1.3, poison gas 2.3, dangerous when wet 4.3, certain organic peroxides 5.2, inhalation-hazard poisons in zones A and B, and radioactive with a Yellow III label.

    Memory tipTable 1 = any amount, no weight math.

    Source: 49 CFR / NY DMV CDL-10 Section 9 · as of 2026

  • Placard Table 2

    All other placarded classes. Except for bulk packaging, they need placards only when the total of all Table 2 material on board, packaging included, is 1,001 pounds or more.

    Memory tipAdd every Table 2 item from every paper.

    Source: 49 CFR / NY DMV CDL-10 Section 9 · as of 2026

  • DANGEROUS placard

    An optional sign you may use instead of separate Table 2 placards when you carry two or more non-bulk Table 2 categories and did not load 2,205 pounds or more of any one class at one place.

    Memory tipOptional, never required; you may always use the specific placards.

    Source: 49 CFR / NY DMV CDL-10 Section 9 · as of 2026

  • Bulk packaging

    A single container that can hold 119 gallons or more. It and the vehicle hauling it must be placarded, even when only residue is left inside.

    Memory tipEmpty bulk tank still gets placards.

    Source: 49 CFR / NY DMV CDL-10 Section 9 · as of 2026

  • Identification number display

    The four-digit ID number of the contents shown on cargo tanks and other bulk packages, on placards, orange panels, or white diamond-shaped displays the same size as placards. First responders use it to identify the material.

    Memory tipOrange panel number = what is in the tank.

  • Placard exceptions

    With EXPLOSIVES 1.1 or 1.2 placards showing, you do not need EXPLOSIVES 1.5 or OXIDIZER placards. With FLAMMABLE GAS (or OXYGEN) placards showing, you do not need NON-FLAMMABLE GAS placards.

    Memory tipThe stronger warning covers the weaker one.

    Source: 49 CFR / NY DMV CDL-10 Section 9 · as of 2026

See it in a picture

Top view of a tractor-trailer with a small diamond placard shape at the front of the tractor, on each long side of the trailer, and at the rear of the trailer.
A placarded vehicle shows a placard on the front, the rear, and each side.

Labels, Markings, and Placards: key points

  • At least 4 identical placards: front, rear, both sides; at least 10.8 inches square, on point
  • Each placard at least 3 inches from other markings; no 'Drive Safely' slogans
  • Table 1 (any amount): 1.1, 1.2, 1.3, 2.3, 4.3, 5.2 Type B temp-controlled, 6.1 inhalation zone A/B, 7 Yellow III
  • Table 2: placard at 1,001 lbs or more total, package weight included (bulk packaging excepted)
  • DANGEROUS allowed: 2+ Table 2 categories, non-bulk, and under 2,205 lbs of any one class loaded at one place
  • No placard: 6.2 infectious, ORM-D; Class 9 not needed domestically
  • Bulk packaging = 119 gallons or more, placarded even with residue only
  • INHALATION HAZARD or a dangerous-when-wet secondary hazard: placard at any amount

Labels, Markings, and Placards: common mistakes

  • Common mistake: Each Table 2 class is under 1,001 pounds, so the load needs no placards.

    What is correct: You add up all the Table 2 materials on board from every shipping paper, packages included. Two classes that each fall short can still total 1,001 pounds or more, and then placards are required.

  • Common mistake: DANGEROUS placards can always stand in for any mix of hazmat classes.

    What is correct: DANGEROUS is an option only for non-bulk Table 2 loads with two or more categories. Once you load 2,205 pounds or more of one Table 2 class at one place, that class needs its own placard, and Table 1 materials always need theirs.

  • Common mistake: A small load can skip the placards because it is under 1,001 pounds.

    What is correct: The 1,001-pound threshold only applies to Table 2. Table 1 materials, products marked INHALATION HAZARD, and those with a dangerous-when-wet secondary hazard need placards in any amount.

Labels, Markings, and Placards: 10 sample questions

Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 1. At minimum, how many identical placards must a placarded vehicle have?

  1. ① Six
  2. ② Four
  3. ③ Two
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ② Four

Key point: Placarded vehicle: at least 4 identical placards

A placarded vehicle must have at least four identical placards: on the front, the rear, and both sides. They must be readable from all four directions.

Wrong choices

  • Six: The minimum is fewer than six.
  • Two: Two would leave some directions without a placard.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 2. Except for bulk packaging, Placard Table 2 materials need placards when the total amount is at least how much?

  1. ① 1,001 pounds, including the package
  2. ② 1,001 pounds, not counting the package
  3. ③ 100 pounds, including the package
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ① 1,001 pounds, including the package

Key point: Table 2: placard at 1,001 lbs or more, with package

Table 2 materials need placards only if the total is 1,001 pounds or more, including the package. Add the amounts from all shipping papers for all Table 2 products on board.

Wrong choices

  • 1,001 pounds, not counting the package: The weight of the package is included.
  • 100 pounds, including the package: The Table 2 amount is much higher than this.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 3. The figure shows a tractor-trailer from above with five spots labeled A to E. The vehicle needs placards. Where must they go?

Top view of a tractor-trailer, front at the left. Letter A is at the front of the tractor, B on one side of the trailer, C on the other side of the trailer, D at the rear of the trailer, and E in the middle of the trailer roof.
  1. ① B, C, and E only
  2. ② A and D only
  3. ③ A, B, C, and D
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ③ A, B, C, and D

Key point: Placards: front, rear, and both sides

Placards must be on both sides and both ends of the vehicle. The front placard may be on the front of the tractor (A). The sides (B and C) and the rear (D) complete the four. The roof (E) is not one of the required spots.

Wrong choices

  • B, C, and E only: Both ends need placards, and the roof is not a required spot.
  • A and D only: Both sides also need placards.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 4. You are hauling 50 pounds of Division 1.1 explosives. What placards do you need?

  1. ① None, because the load is under 1,001 pounds
  2. ② DANGEROUS
  3. ③ EXPLOSIVES 1.1
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ③ EXPLOSIVES 1.1

Key point: Table 1 (any amount): 1.1 = EXPLOSIVES 1.1

Division 1.1 is in Placard Table 1, which needs placards for any amount. The placard is EXPLOSIVES 1.1.

Wrong choices

  • None, because the load is under 1,001 pounds: The 1,001-pound rule is for Table 2. Table 1 needs placards for any amount.
  • DANGEROUS: DANGEROUS is an option only for some mixed Table 2 loads.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 5. The words INHALATION HAZARD appear on the shipping paper for a small amount of material. What placards are needed?

  1. ① None, because the amount is small
  2. ② POISON INHALATION HAZARD or POISON GAS placards, plus the hazard class placard
  3. ③ Only DANGEROUS placards
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ② POISON INHALATION HAZARD or POISON GAS placards, plus the hazard class placard

Key point: INHALATION HAZARD: poison placard + class placard

If INHALATION HAZARD is on the shipping paper or package, display POISON INHALATION HAZARD or POISON GAS placards in addition to the hazard class placard, even for small amounts. The 1,000-pound exception does not apply.

Wrong choices

  • None, because the amount is small: Small amounts still need these placards.
  • Only DANGEROUS placards: The poison placard and the class placard are both required.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 6. Your vehicle carries 600 pounds of Class 3 flammable liquid and 500 pounds of Class 8 corrosive, all in non-bulk packages loaded at one place. Which placarding is allowed?

  1. ① No placards, because each class is under 1,001 pounds
  2. ② Only DANGEROUS placards
  3. ③ FLAMMABLE and CORROSIVE placards, or DANGEROUS placards instead
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ③ FLAMMABLE and CORROSIVE placards, or DANGEROUS placards instead

Key point: Mixed Table 2, none 2,205+: DANGEROUS is an option

  1. Both are Table 2. Total = 600 + 500 = 1,100 pounds, which is 1,001 or more, so placards are needed.
  2. There are two Table 2 categories needing different placards, and neither reaches 2,205 pounds at one place.
  3. So you may use FLAMMABLE and CORROSIVE placards, or DANGEROUS placards instead.

Wrong choices

  • No placards, because each class is under 1,001 pounds: You add all Table 2 amounts together. The total is 1,100 pounds.
  • Only DANGEROUS placards: DANGEROUS is an option, not a requirement. You can always placard for each material.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 7. What is the size rule for a placard?

  1. ① At least 6 inches square, set flat like a box
  2. ② Any size, as long as the words can be read
  3. ③ At least 10.8 inches square, set on point like a diamond
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ③ At least 10.8 inches square, set on point like a diamond

Key point: Placard: at least 10.8 inches square, on point

Placards are at least 10.8 inches square, turned on point in a diamond shape.

Wrong choices

  • At least 6 inches square, set flat like a box: This is smaller than a placard must be, and placards are set on point.
  • Any size, as long as the words can be read: There is a minimum size.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 8. When may you move a vehicle that is not properly placarded?

  1. ① Only in an emergency, to protect life or property
  2. ② Any time, as long as the shipping papers are correct
  3. ③ When driving it back to the terminal to fix the placards
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ① Only in an emergency, to protect life or property

Key point: Improperly placarded: move only in an emergency

Put the right placards on before you drive. You may move an improperly placarded vehicle only during an emergency, to protect life or property.

Wrong choices

  • Any time, as long as the shipping papers are correct: Correct papers do not replace correct placards.
  • When driving it back to the terminal to fix the placards: This is not an emergency. Placards go on before you drive.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 9. A single container counts as bulk packaging when its capacity is at least:

  1. ① 1,001 gallons
  2. ② 119 gallons
  3. ③ 55 gallons
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ② 119 gallons

Key point: Bulk packaging = single container of 119+ gallons

A bulk packaging is a single container with a capacity of 119 gallons or more.

Wrong choices

  • 1,001 gallons: 1,001 is the Table 2 weight in pounds, not the bulk size.
  • 55 gallons: This is smaller than the bulk size given.
Practice questionReviewedCDL Hazardous Materials Test › Labels, Markings, and Placards★★★★★

Question 10. A cargo tank shows the orange panel in the figure. What does the four-digit number 1263 tell first responders?

A rectangular orange panel with a thick black border, showing the number 1263 in large black digits. A caption reads: Orange panel on a cargo tank.
  1. ① The hazard class of the material
  2. ② The identification number of the material in the tank
  3. ③ The weight of the load in pounds
▼ Show answer and explanation▲ Hide answer and explanation

Answer: ② The identification number of the material in the tank

Key point: 4-digit number on orange panel = ID number

Cargo tanks and other bulk packaging show the identification number of their contents on placards, orange panels, or white diamond displays. This four-digit code is used by first responders to identify the material.

Wrong choices

  • The hazard class of the material: Hazard classes are one digit, sometimes with a division, such as 3 or 2.1.
  • The weight of the load in pounds: The four digits are not a weight.

Test yourself.

Importance
★★★★★ (5 / 5)
Weight
About 6 of 30 CDL Hazardous Materials Test questions (20%)

AI-written · Verified · Written by AI. Only units that passed a separate AI check (re-reading facts and numbers) are published. Tell us if you find a mistake.