CDL Hazardous Materials (HazMat) Concept Review
Based on 2026 exam standards
In the print window, choose 'Save as PDF' as the destination to get a file.
Source: ExamPasso https://exampasso.com/en/cert/cdl-hazmat/concepts
Summary notes
Section 1 ยท CDL Hazardous Materials Test30 questions
1-1. Purpose of the Rules and Who Does What
โ โ โ โโ 10% (estimate)
Overview
This chapter is the starting point for the hazmat test. You learn what the rules are trying to do, what New York asks of you before it adds the H or X endorsement to your license, and how the work is split among the people who handle a hazmat load. Many questions simply ask which person owns a certain task, so knowing the three job lists pays off.
The rules have three goals. First, keep the product inside its package and on the truck; the manual calls these containment rules. Second, warn everyone about the danger through labels, shipping papers, emergency information, and placards. Third, make sure drivers and equipment are safe, which is why you must pass a written test and why breaking the rules can bring fines and even jail.
To get the endorsement in New York, you must be at least 21, finish entry-level hazmat training if this is your first time, pass the knowledge test, and clear fingerprint background checks. Those checks look for a criminal history or a security threat. Your employer must also train and test you on a regular schedule, including how to spot and respond to security threats, and must keep a record of that training.
The shipper prepares the load: it picks the shipping name, class, ID number, packing group, and packaging, then labels it, writes the papers, supplies placards, and signs that it followed the rules. The carrier checks the shipper's work before the trip, turns down improper loads, and reports accidents to the government. You, the driver, check the shipment too, refuse leaking packages, placard when loading if required, keep the papers in their proper place, and deliver without delay.
Key notes
- Hazardous Materials Regulations (HMR)
- โ The federal rule book for moving hazmat. It sits in Title 49 of the Code of Federal Regulations, parts 100 to 185, often written as 49 CFR 100-185.
- Containment rules
- โ The part of the rules that tells shippers how to package hazmat safely and tells drivers how to load, haul, and unload it, so the product stays where it belongs.
- Communicating the risk
- โ The shipper's duty to warn others about the danger. It is done with package labels, shipping papers, emergency response information, and placards.
- H and X endorsements
- โ New York's two hazmat endorsements: H for hazardous materials and X for hazmat combined with tank. You need to be 21 or older, pass the written test with 80%, and pass federal and state background checks.
- Endorsement validity
- โ Once issued, the hazmat endorsement is good for 5 years from the date DMV learns you passed the background checks. Each renewal brings new fingerprints and new checks.
- Hazmat training record
- โ Your employer must train and test you at least once every 3 years and keep a record of it for as long as you work with hazmat, plus 90 days after.
- Carrier
- โ The company that moves the load from the shipper to its destination. Before the trip it checks the shipper's description, marks, and labels, turns down improper loads, and reports hazmat accidents and incidents.
โ Exam points
- Questions that ask who signs the certification or supplies placards point to the shipper.
- A leaking package is refused by the driver, no matter who signs the papers.
- Moving to New York means a new application, the NY test, and NY fingerprints; the old endorsement does not carry over.
- States and counties may set special hazmat routes; some places require permits.
- The endorsement is tied to placard-level loads, not to the size of the truck.
1-2. Hazard Classes and Shipping Papers
โ โ โ โ โ 20% (estimate)
Overview
This chapter covers how a hazmat load is described on paper. You learn the nine hazard classes, how to read the Hazardous Materials Table, what the shipping paper must say, and where you keep it in the cab. If you are hurt in a crash, the papers speak for you, so firefighters and police can learn what you carry right away.
Each material belongs to a hazard class, and many classes are split into divisions. For example, propane is a flammable gas, helium is a non-flammable gas, and battery fluid is a corrosive. The packing group, written in Roman numerals, shows how dangerous the product is, from I for the greatest danger to III for the least. Some groups of materials, such as gases and radioactive materials, never get a packing group.
The Hazardous Materials Table lists proper shipping names in regular type; names in italics are not proper shipping names. A symbol in the first column changes how the entry is used, and the word Forbidden in the class column means the material may never be hauled. Before you take a load, look for its name on three lists: the table itself, the list of hazardous substances and reportable quantities, and the list of marine pollutants.
The shipping paper must give a basic description in a set order, show page numbers on longer papers, and carry the shipper's signed certification on the original. Hazmat items mixed with other freight must stand out by being listed first, printed in a different color, or marked with an X or RQ in an HM column. Emergency response information goes with the papers, must work away from the truck, and you hand it to any official who responds to or investigates an incident.
Key notes
- Shipping paper
- โ Any document that describes the hazmat being hauled, such as a bill of lading, shipping order, or manifest. It must be easy for officials to find and recognize after a crash or during an inspection.
- Packing group (PG)
- โ A Roman numeral in Column 5 of the Hazardous Materials Table that shows how dangerous a material is: I is great danger, II is medium, and III is minor.
- Basic description
- โ The core line for each hazmat entry on the shipping paper, written in this order: the ID number, the proper shipping name, the class or division, and then the packing group if one applies. The first three may not be shortened unless the rules allow it.
- Column 1 symbols
- โ Letters in the first column of the table. 'A' means the rules apply only by air and 'W' only by water (with exceptions); 'D' is a domestic name, 'I' an international name, 'G' a generic name that needs a technical name, and '+' fixes the name, class, and group.
- Reportable quantity (RQ)
- โ A listed hazardous substance becomes an RQ when one package holds at least the amount shown in the list. The shipper then shows RQ on the paper and package, and a spill of that size must be reported.
- Uniform Hazardous Waste Manifest
- โ The paper used for hazardous waste. Shippers and every carrier sign it by hand, it lists EPA registration numbers, and you hand the waste only to another registered carrier or a disposal or treatment facility.
- Emergency response information
- โ Details on the shipping name, health, fire, and explosion risks, and first steps for spills, fires, and leaks. It travels with the shipping papers, must be usable away from the truck, and may be a guidebook such as the ERG.
โ Exam points
- With the seat belt on, the papers must be in clear view and within reach, or in the door pouch.
- 'NA' before an ID number means a name used only in the U.S. and to and from Canada; 'UN' is the other prefix.
- Column 7 numbers 1 to 6 mean a poison inhalation hazard with extra paper, marking, and placard rules.
- A nonhazardous product may not be described with a hazard class or ID number.
- In the quantity part of the entry, you may shorten only the kind of package and the unit of weight or volume.
- Freight in drums or cylinders from a chemical supply house is a strong hint of hazmat.
1-3. Labels, Markings, and Placards
โ โ โ โ โ 20% (estimate)
Overview
Labels and placards are the pictures and signs that warn people about hazmat. Labels and markings go on the packages, while placards go on the outside of the vehicle and on bulk packages. This chapter shows where each one goes, how placards must be mounted, and how to pick the right placards for a load.
Shippers put diamond labels on most hazmat packages, and a tag or decal may be used when a label will not fit, as on a gas cylinder. Package markings include the shipping name, which must match the name on the shipping paper, and the ID number. Packages holding liquid containers carry arrows that must point up for the whole trip. It is smart to compare the papers with the labels and markings before you leave.
Placards must be on before you move the truck, and you may only drive without proper placards in an emergency to protect life or property. Each sign must face its direction, read level from left to right, stay clean, sit on a contrasting background, and be kept clear of ladders, doors, and tarps. The front placard can be on the tractor or on the front of the trailer.
To choose placards, you need the hazard class, the amount of each material, and the total weight of all hazmat on board. The most dangerous materials are in Table 1 and need placards in any amount. The rest are in Table 2 and need placards once the total reaches the weight limit. A few special rules let you skip one placard when a stronger one is already showing, and other rules add placards even for small amounts.
Key notes
- Placard
- โ A diamond-shaped warning sign on the outside of a vehicle or bulk package that shows the hazard class. A placarded vehicle needs at least four identical ones, at least 10.8 inches square, readable from all four directions.
- Placard Table 1
- โ Materials that need placards in any amount: explosives 1.1 to 1.3, poison gas 2.3, dangerous when wet 4.3, certain organic peroxides 5.2, inhalation-hazard poisons in zones A and B, and radioactive with a Yellow III label.
- Placard Table 2
- โ All other placarded classes. Except for bulk packaging, they need placards only when the total of all Table 2 material on board, packaging included, is 1,001 pounds or more.
- DANGEROUS placard
- โ An optional sign you may use instead of separate Table 2 placards when you carry two or more non-bulk Table 2 categories and did not load 2,205 pounds or more of any one class at one place.
- Bulk packaging
- โ A single container that can hold 119 gallons or more. It and the vehicle hauling it must be placarded, even when only residue is left inside.
- Identification number display
- โ The four-digit ID number of the contents shown on cargo tanks and other bulk packages, on placards, orange panels, or white diamond-shaped displays the same size as placards. First responders use it to identify the material.
- Placard exceptions
- โ With EXPLOSIVES 1.1 or 1.2 placards showing, you do not need EXPLOSIVES 1.5 or OXIDIZER placards. With FLAMMABLE GAS (or OXYGEN) placards showing, you do not need NON-FLAMMABLE GAS placards.
โ Exam points
- Infectious substances (6.2) and ORM-D need no placard, and Class 9 is not required for trips within the U.S.
- On cargo tanks and portable tanks, a FLAMMABLE placard may be used where COMBUSTIBLE would go.
- A material marked INHALATION HAZARD needs POISON INHALATION HAZARD or POISON GAS placards plus its class placard, even in small amounts.
- When one package needs two or more labels, they go side by side near the shipping name.
- You may display a placard that is not required, as long as it names the real hazard.
1-4. Loading and Unloading
โ โ โ โ โ 15% (estimate)
Overview
This chapter is about the moments when hazmat goes on or comes off your truck. Careless handling at the dock can damage containers and start leaks, so the manual gives you a long list of rules. Some apply to every load, and others apply only to one hazard class. Test questions often name a class and ask which rule fits it.
For every load, hold the truck still with the parking brake and keep packages away from heat, because many products get more dangerous when warm. Do not use hooks or tools that could puncture a container. Brace everything so nothing slides, falls or bounces on the way. If you spot a leaking package, it stays off your truck, since hauling a leak is against the law. Keep flames and smoking away from the burning-type classes and the oxidizers.
Some classes have their own rules. With explosives, shut the engine off, check the cargo space, and refuse any package that is damp, stained with oil or damaged. Corrosive liquids in breakable containers go on one at a time, upright, on an even floor, and nitric acid never rides on top of other freight. Cylinders are held upright in racks fixed to the truck or in boxes that keep them from tipping, unless a cylinder is built to lie flat with its relief valve in the vapor space, and a truck without racks needs a flat cargo floor. Poisons stay out of the cab and away from food.
Radioactive II and III packages carry a transport index on their label. You add the numbers for all packages, and the total for one vehicle has a limit. Table A in the manual then tells you how far those packages must stay from people, cargo walls and undeveloped film.
Key notes
- Closed cargo space
- โ An enclosed area of the vehicle. Explosives, flammable solids and oxidizers must travel inside one, with no overhang or tailgate loads, unless every package resists fire and water or is under a tarp that does.
- Cargo heater rules
- โ Special limits on loading explosives, flammable gas and flammable liquids into a space with a heater, including automatic heater and air conditioner units. In most cases the heater may not be used.
- Floor liner for explosives
- โ A lining needed under Division 1.1, 1.2 and 1.3 loads. The floor must be tight, and the liner must be non-metallic or a metal that is not iron-based.
- Transport index
- โ A number printed on Radioactive II and III labels that shows how much control the package needs. The sum for all packages on one vehicle may not go over 50.
- Radioactive Separation Table A
- โ A chart that turns the total transport index into a minimum distance from people, cargo compartment walls and undeveloped film. Find the row for the index, then read across to the column you need.
- Do Not Load Table
- โ The manual's table (Figure 9.10) of materials that may not be loaded in the same vehicle together. Examples: Division 6.1 or 2.3 poison never with food unless overpacked, and cyanides never with acids.
โ Exam points
- An emergency move of Division 1.1 explosives between trucks on a public road calls for three bi-directional reflective triangles.
- Class 4 and Class 5 materials that turn dangerous when wet stay dry on the road and at the dock.
- Division 1.1 or 1.2 explosives may not go in a combination that has a marked or placarded cargo tank.
- Under Table A, an index from 1.1 to 5.0 must stay at least 2 feet from people and cargo walls.
1-5. Bulk Packaging and Cargo Tanks
โ โ โ โโ 10% (estimate)
Overview
Bulk packaging is any large container such as a cargo tank, a portable tank or an intermediate bulk container. This chapter covers how these packages are marked and the extra care needed when product flows in or out of a tank. Expect questions about marking sizes, who must watch the tank, and the order of steps when you load or unload.
A cargo tank is built onto the truck and is filled and emptied right there. A portable tank comes off the vehicle to be filled or emptied and is then set back on for the trip. Bulk packages must show the product's identification number, which you find in the Hazardous Materials Table. Spec cargo tanks also carry retest date markings, while IBCs may skip the owner's name and shipping name. On a portable tank, the size of the tank decides how big the name letters are and on how many faces the number goes.
A qualified person has to watch the whole time a cargo tank is being loaded or unloaded. That person stays close, keeps the tank in view, knows the dangers and what to do in an emergency, and has the right and the skill to move the tank. Before the tank rolls, every manhole and valve gets closed, even for a small leftover amount.
Flammable liquids and compressed gases add their own steps. Keep the engine off unless it powers the pump. Ground the tank before you open a filling hole and leave the ground on until the hole is shut again. On a compressed gas tank, the liquid discharge valves stay closed except while product is moving.
Key notes
- Cargo tank
- โ Bulk packaging permanently fixed to a vehicle and loaded or unloaded while it stays on the truck. The MC306 is the usual one for liquids and the MC331 for gases.
- Portable tank
- โ Bulk packaging that is not fixed to the vehicle. Product goes in or out while the tank is off the truck, then the tank is put on for transport.
- Intermediate bulk container (IBC)
- โ A type of bulk package. It counts as bulk packaging, but it does not have to show the owner's name or the shipping name.
- Identification number display
- โ Bulk packages show the product's ID number from column 4 of the Hazardous Materials Table in black 100 mm (3.9 inch) figures on an orange panel, a placard, or a white diamond when no placard is needed.
- Tank watcher
- โ The qualified person who watches a cargo tank during loading or unloading. They must be alert, within 25 feet, with a clear view, know the hazards and emergency steps, and be allowed and able to move the tank.
- Grounding
- โ A required step when a cargo tank is filled with flammable liquid through an open filling hole. The ground goes on before the filling hole is opened and comes off only after the hole is closed.
โ Exam points
- A portable tank of 1,000 gallons or more shows its ID number on each side and each end.
- If a portable tank's numbers cannot be seen once it is on the truck, show them on both sides and ends of the vehicle.
- Specification cargo tanks must carry retest date markings.
- With an engine-driven pump, stop the engine before you unhook the hose.
1-6. Driving and Parking Rules
โ โ โ โ โ 15% (estimate)
Overview
A placarded load changes how you park, how you watch your truck, and which roads you take. This chapter gathers those rules. Most test questions give a distance or a place and ask whether it is allowed, so the numbers matter here more than in other chapters.
Explosives in Divisions 1.1, 1.2 and 1.3 have the strictest parking rules. Stay well off the traveled road, and keep a wide gap from bridges, tunnels, buildings, crowds and open fires unless you are stopped only for a need such as fuel. Someone must always watch such a truck, and only the shipper's, carrier's or consignee's property lets you hand that job to another person. A safe haven is the one place you may leave it alone. Other placarded loads may park near the road only briefly when the work calls for it, and a trailer full of hazmat is never dropped on a public street.
Watching the truck has a clear meaning: be in the cab and awake, not in the sleeper, or nearby with the truck in plain view. You must also know the hazards, know the emergency steps and be able to move the truck. If you break down with a tank of flammable liquid or gas, or with certain explosives, use reflective triangles or red electric lights, never anything that burns.
On the road, choose routes that stay clear of crowds, tunnels, narrow streets and alleys, and find out yourself which permits or routes apply. Keep fire away by not smoking near the load and by shutting the engine off while someone tends the fuel nozzle. Check dual tires with a gauge, deal with any overheated tire before you go on, and keep your shipping papers within reach. At railroad crossings, placarded trucks, chlorine loads and hazmat cargo tanks must stop.
Key notes
- Safe haven
- โ An approved place where a vehicle loaded with explosives may be parked with no one watching it. Local authorities usually choose these places.
- Attended vehicle
- โ A placarded vehicle with someone who is in it, awake and out of the sleeper, or within 100 feet with a clear view. That person knows the hazards and the emergency steps and can move the truck.
- Written route plan
- โ A plan that must be made and followed for Division 1.1, 1.2 and 1.3 explosives. The carrier usually writes it, but if you pick up away from your terminal you may write it yourself ahead of time and keep a copy.
- FMCSR Part 397
- โ The federal rules for driving and parking vehicles that carry hazardous materials. With Division 1.1, 1.2 or 1.3 explosives you carry a copy along with the papers, emergency instructions and route plan.
- Burning warning signals
- โ Flares and fusees. They are not allowed around a Class 3 or Division 2.1 tank, loaded or empty, or around Division 1.1, 1.2 or 1.3 explosives.
- Shipping paper location
- โ While driving, the papers sit within reach with your seat belt fastened or in the driver's door pouch, where anyone entering the cab can see them. The emergency response information goes with them.
โ Exam points
- Explosives parking: 5 feet from the road, 300 feet from bridges, tunnels, buildings, crowds and fire.
- The power unit of a placarded vehicle needs a fire extinguisher rated UL 10 B:C or higher.
- Drivers hauling chlorine in cargo tanks carry an approved gas mask and a leak kit for dome cover plate fittings.
- An overheated tire comes off and is set a safe distance away; do not drive until you fix the cause.
- Company drivers ask the dispatcher about permits and routes; independent truckers check with state agencies.
1-7. Emergencies and Reporting
โ โ โ โ โ 10% (estimate)
Overview
Even careful drivers can face a crash, fire or spill. This chapter explains what you should do, what you should leave to trained responders, and which events must be reported. Test questions usually ask for the safe first step or the thing you must never do.
Responders use the DOT's Emergency Response Guidebook, which they look up by proper shipping name and ID number, so correct papers and placards really matter. At a crash, check your partner, keep the papers on you, move people far back and upwind, warn others and call for help. Try to stop the spread of material only if you can do it without danger, and hand the papers and emergency information to responders when they arrive.
Fire and leaks call for restraint. Your extinguisher is meant to stop a small truck fire before it reaches the cargo, not to fight hazmat burning in the trailer. Hot trailer doors stay closed, because fresh air can make a smoldering fire flare up. Identify a leak from the papers, labels or where the package sits, and never touch or sniff it. If the vehicle is spilling, stop, guard the area and send someone else for help with the details written down, since the carrier pays for every road and ditch the leak reaches.
Some hazard classes have their own steps, such as moving explosives away before wrecked vehicles are pulled apart and not opening smoldering packages of flammable solids. Afterward, certain serious incidents must be phoned in to the National Response Center, and the carrier files a detailed written report later. CHEMTREC is a separate 24-hour line that gives responders technical facts about the material.
Key notes
- Emergency Response Guidebook
- โ A DOT guide that tells firefighters, police and industry workers how to protect themselves and the public from hazmat. It is looked up by proper shipping name and ID number.
- Spill rule: park, secure, stay, send
- โ What you do when hazmat is spilling from your truck. Stop the vehicle, guard the area, remain there, and have someone else go for help with the facts written down for them.
- National Response Center
- โ The center that must be phoned after serious hazmat incidents, such as a death, an injury needing a hospital, an evacuation over one hour, a major route closed one hour or more, or damage over $50,000.
- CHEMTREC
- โ The Chemical Transportation Emergency Center, a toll-free line open around the clock. It gives emergency personnel technical facts about the physical properties of hazardous materials.
- Survey meter check
- โ After a leak or broken package of radioactive material, the vehicle may not be used until it is cleaned and checked with a survey meter. Tell your dispatcher or supervisor as soon as you can.
- Stray poison check
- โ A vehicle involved in a leak of Division 2.3 or 6.1 poison must be checked for leftover poison before it goes back into service.
โ Exam points
- Explosives come out of wrecked vehicles before the vehicles are separated, and go at least 200 feet away.
- The carrier must file a detailed written incident report within 30 days.
- Vehicle parts touched by corrosive liquid get washed thoroughly with water.
- A flammable compressed gas is moved tank to tank on a public road only to fuel road construction or maintenance machinery.
- Do not open a smoldering package of flammable solids; take it off the truck if that is safe.
Multiple choice questions on the Hazardous Materials section of your state's CDL manual (Section 9 in the common manual layout) ยท 1 sections ยท 30 questions ยท 35 min
Pass: 80 points average
Source: State driver licensing agencies (DMV) ยท as of 2026
AI-written ยท Verified ยท Written by AI. Only units that passed a separate AI check (re-reading facts and numbers) are published. Tell us if you find a mistake.